The retractable ceiling column is a manually operated design, and includes an upper section for rigid mounting at the ceiling level, a telescopic lower section capable of 15" (381mm) vertical adjustment, and a stainless steel ceiling collar. The retractable section of the column is controlled by a handle operation capable of stopping at any user determined position within the vertical range. The lever handle is located on the bottom faceplate of the telescopic section

The retractable ceiling column shall be of the air or nitrogen operated design, and includes an upper section for rigid mounting at the ceiling level, a telescopic lower section capable of 15" (381mm) vertical adjustment, and a stainless steel ceiling collar. The retractable section of the column is controlled by a pneumatic cylinder capable of stopping at any user determined position within the vertical range. The speed and direction of the telescopic section is controlled by an air control valve with a lever handle located on the lower side of the movable section.

The rigid ceiling column consists of a single stainless steel shroud forming a 12" (304.8 mm) x 12" (304.8 mm) square column. The column includes a removable service access panel, a stainless steel ceiling collar, and a heavy gauge steel mounting plate. The mounting plate is furnished complete with four (4) 0.875" (22.22mm) threaded rods for installation.

The heavy duty range is composed of the systems:
Multimovement Pendant for loads up to 200 kg
OndaScope Variant for loads up to 380 kg
OndaScope for loads up to 470 kg or 1000 kg

Multimovement Pendant® 90 and @200

Types of Systems:
Ceiling System as a spring balanced arm or with an electromotive adjustment System to adapt:
ES-apparatus, monitors, anaesthesia and surgical equipment, small service heads

• Electromotive multimovement pendant 90 and service head with HF equipment
  
  
• Multimovement pendant 200,vertical movement by an electric motor, ceiling mounted, individual design on customer request
  
  
• Multimovement pendant 200 with extension arm
  
  

OndaScope as a dual system, single and dual arms, with supply unit, infusion and pump rod set

A) OndaScope 650 with service head
B) OndaScope 650 with an electric box and infusion rodset
C) OndaScope 650 as a dual system

Pendants improve the hygiene and safety for patients and staff by allowing devices to be kept clear of the floor. The overall efficiency of the ITU is improved through improved cleaning procedures.

Pendants also allow unhindered access to the patients head and upper body thus improving patient care.

If the patient needs to be repositioned, the arms can be easily swivelled, allowing wet and dry sides to be swapped.

A special docking system is available, allowing mobile ventilation trolleys to be attached to the service head, thus ensuring the trolley moves in tandem with the pendant arm.

Each services head (corpus) is user configurable to ensure that sufficient numbers of shelves and gas & electrical outlets are available.