|
PES Remote Controlled
Iron Boundary Gate Series
|
Remote
Controlled Swing Gate Operator Model : PS207
|
|
 |
|
The
swing gate operator is used to drive swing gates for
industrial, commercial and residential uses. The biggest
push power of the device is 1500N. To protecting the
device, an electric lock is provided to install when
the width of gate leaf is more than 1.5 meters. In case
of power failure, an mergency release key allows operate
gate manually.
|
|
|
|
|
|
|
| Advanced
Features: |
- Self-locking
and reversible electro-mechanical gear motor
- Body
in die-cast aluminum
-
Adjustable support brackets
- Built-in
micro switches for gate opening arrest
- Opening
angle up to 105°
- One
model only for left and right hand
- Overheat
or over-current protection
- Time-delay
protection
- DC12V
electric lock
- Emergency
Release Key in case of power failure
- Control
panel wiring are available to safety device,
alarm lamp and remote controller
|
|
| Technical
Specifications |
| Model |
PS207 |
| Power
supply |
24VDC |
| Motor
power |
45W |
| Thrust |
1500N |
| Opening
time |
18sec |
| Opening
angle |
90°to
105° |
| Max.
leaf weight |
150kg |
| Max.
leaf width |
2m |
| Duty
cycle |
25% |
| Working
temperature |
-25?
to 60? |
|
| Remote
Controlled Sliding Main Gate Operator Model: PS200DC |
| The
Sliding gate operators are used to drive sliding
gates for industrial, commercial and residential
uses. The operators can be fitted with gear wheel
or chain wheel according to your needs, and featured
with powerful starting strength, capable of overwork
at short time. In case of power failure, an emergency
release key allows operate gate manually. |
|
Advanced
Features:
- Gear-driver
or chain-driver is optional
- Magnetic
or spring limit switch is optional
- The
self-locking electro-mechanical gear motor keeps
the gate completely closed
- Motor
torque adjustment
- Stop
on closing if it hits obstruction
- Overheat
& Overload dual protection
- Emergency
release key in case of power failure
- Control
panel wiring are available to safety device,
alarm lamp and remote controller
- Available
in 24VDC version, which can be operated by storage
battery
|
 |
|
Gear Rack (for gear wheel type driver):
Technical
Specifications
|
|
| Model |
PS200DC |
| Power
supply |
24VDC |
| Motor
speed |
1800rpm |
| Motor
power |
120W |
| Output
torque |
18N.m |
| Max.gate
weight |
750kg |
| Opening
speed |
12m/min |
| Reduction
ratio |
1:30 |
|
 |
|
|
|
|
